A vertical steel tank with a volume of 3,000 m³ (RVS-3000m3) is used for storing oil and petroleum products, alcohols, water, and other technical liquids.<span id="bx-cursor-node"> </span>
A **vertical steel tank with a volume of 3,000 m³ (RVS-3000m3)** is used for storing oil and petroleum products, alcohols, water, and other technical liquids. The density of the stored product must not exceed 1 t/m³. These tanks operate at pressures up to 2 kPa and temperatures up to +95ºС. Externally, RVS tanks have a cylindrical shape. As a rule, RVS-3000 m3 tanks feature a **frame-panel roof**. Tank installation can be carried out using two technologies: the **rolling method** or the **plate-by-plate method**.
TOO SAMRUK KAZ manufactures vertical steel tanks in accordance with **TU-5265-002-694784422013** and holds the necessary **Certificates of Conformity**.
**Low-carbon and low-alloy steels** are used for production. The choice of steel grade depends on the chemical properties of the stored product and the operating temperature. For storing highly corrosive liquids (water, milk, and other food products), **stainless steel** is applied.
The production of vertical steel tanks RVS-3000m3 is possible in various climatic versions: for operation in warm climates, as well as in moderate and cold climates.
All stages of design and manufacturing of vertical tanks comply with the state standard **GOST 31385-2016 "Vertical cylindrical steel tanks for oil and petroleum products. General technical conditions."**
TOO SAMRUK KAZ manufactures RVS tanks with a volume of 3,000 m3 of the following designs:
with a **pontoon (RVSP-3000)**
with a **floating/stationary roof**
with a **double (protective) wall**
|
RVS-3000 Tank Parameters |
Unit of Meas. |
Values: |
|
Volume |
m³ |
3000 |
|
Diameter |
mm |
18 980 |
|
Height |
mm |
12 000 |
|
Mass |
kg |
87 906 |
|
Number of coils (for rolling method) |
coil |
2 |
|
Number of shell courses |
course |
8 |
|
Top shell course thickness |
mm |
6 |
|
Bottom shell course thickness |
mm |
8 |
|
Frame-panel roof, roof decking thickness |
mm |
5 |
|
Bottom thickness central part/rim |
mm |
5/8 |
*Overall dimensions are for reference and may vary depending on Customer requirements
- shaft or straight-flight ladder (upon request),
- annular service platform - 1 set,
- equipment (hatches, nozzles) – 1 set.
Upon Customer request, we produce vertical tanks with a volume of 3000 m3 with thermal insulation or a heater (sectional or heat exchange jacket), which help maintain a given temperature.
If it is necessary to increase the service life of the tank and/or store aggressive liquids in it, the designer can include a corrosion allowance for the tank structures.
Drawing of the RVS-3000 vertical tank structure
1 - shell, 2 - bottom, 3 - roof, 4 - hatches and nozzles in the shell and roof, 5 - spiral staircase, 6 - platforms and railings on the roof, 7 - grounding attachment.
The shell, roof, and bottom are produced from rectangular steel sheets. The size of the sheets used depends on the element, for example, for the cylindrical shell, panels up to 1.5x6.0 m are taken. The used steel sheets are then welded into panels and coiled on a rolling stand.
The stationary roof is a conical surface, manufactured as a cone at an angle of 15-30º. The roof decking is a flat round steel sheet with a sector-shaped opening; when its edges are pulled together, a conical structure is formed.
The bottom is a flat structure, consisting of steel sheets welded into a panel of the required size (depending on the volume).
RVS-3000 m3 tanks with a pontoon or floating roof are more reliable structures: they prevent the evaporation of stored liquid into the atmosphere. However, they must be operated without pressure and without vacuum.
A protective wall also prevents the stored product from entering the environment in case of leakage.
Integral structural elements are ladders and platforms with or without railings, necessary for personnel access.
Hatches and nozzles for installing technological equipment (receiving-dispensing equipment, level control devices, etc.) are provided in the body and roof at the design stage and then during manufacturing. For this purpose, NTKOILSERVICE factory provides for the production of technological tank equipment, which includes loading/unloading devices, nozzles, hatches, equipment for measuring the level of stored liquid. You can find more detailed information on the range of manufactured equipment in the "Tank Equipment" section.
In case of ordering an RVSP-3000 m3 tank with a pontoon, RVSP-3000 m3 tanks can be supplied with steel and aluminum pontoons at the Customer's discretion.
The metal structure of the RVSP-3000 m3 tank may include a steel pontoon.
Type: open-type pontoon with compartments.
Pontoon decking thickness: 5 mm.
Boxes: 12 boxes, 2,300 mm wide.
Edge width: outer 500 mm, inner 280 mm.
Weight: 18,220 kg.
The open compartments of such a pontoon consist of decking and annular ribs. This ensures the pontoon's floating capability and the necessary rigidity during its vertical movement.
The pontoon moves along a guide pipe. In the lowered position, the pontoon rests on the cantilever of this pipe, as well as on special brackets located on the tank shell.
The pontoon is equipped with a sealing gasket to seal the gap between its edge and the tank wall.
TOO SAMRUK KAZ is a modern industrial enterprise focused on: • Designing and developing engineering documentation for oil depots, tank farms, pipeline routes, various metal structures, and non-standard equipment; • Manufacturing metal structures, tanks, and vessels for various purposes (Vertical Steel Tanks (RVS), Horizontal Steel Tanks (RGS), Underground Tanks (UT)) in both above-ground and underground configurations with necessary equipment installation, as well as producing metal structures for buildings, constructions, railway overpasses, and supports for technological pipelines using various materials (alloyed and high-alloyed steel, stainless steel, aluminum alloys, etc.); The company has a logistics department that ensures a continuous construction cycle, allowing for the timely delivery of necessary equipment and machinery to the customer. Delivery is provided upon the customer's request as part of a comprehensive service package for the production and installation of tank and vessel equipment. The cost of services is calculated individually. You can learn more about TOO SAMRUK KAZ's production capacities in the "Production" section.
Year of foundation
tanks produced
vessels produced
metal structures produced
TOO SAMRUK KAZ is a manufacturer providing comprehensive supplies of tanks for various purposes, as well as tank equipment for the oil and gas, energy, chemical, and other industries.
The company has many years of experience in manufacturing and designing industrial equipment.
We utilize the most advanced industrial equipment for manufacturing and guarantee the highest quality of our products.
We deliver equipment on time. We have a well-established production and logistics structure.
