Vertical steel tank 300

CHARACTERISTICS

TECHNICAL SPECIFICATIONS OF RVS-100M3 TANK

*Overall dimensions are for reference and may vary depending on Customer requirements

RVS 100 M3 TANK COMPLETE SET:

·         shaft or straight-flight ladder (upon request),

·         annular service platform - 1 set,

·         equipment (hatches, nozzles) – 1 set.

Upon Customer request, we produce vertical tanks with a volume of 100 m3 with thermal insulation or a heater (sectional or heat exchange jacket), which help maintain a given temperature.

If it is necessary to increase the service life of the tank and/or store aggressive liquids, the designer can include a corrosion allowance for the tank structures.

RVS-100 DRAWING

Drawing of the RVS-100 vertical tank structure

1 - shell, 2 - bottom, 3 - roof, 4 - hatches and nozzles in the shell and roof, 5 - spiral staircase, 6 - platforms and railings on the roof, 7 - grounding attachment.

The shell, roof, and bottom are produced from rectangular steel sheets. The size of the sheets used depends on the element, for example, for the cylindrical shell, panels up to 1.5x6.0 m are taken. The used steel sheets are then welded into panels and coiled on a rolling stand.

The stationary roof is a conical surface, manufactured as a cone at an angle of 15-30º. The roof decking is a flat round steel sheet with a sector-shaped opening; when its edges are pulled together, a conical structure is formed.

The bottom is a flat structure, consisting of steel sheets welded into a panel of the required size (depending on the volume).

RVS-100 m3 tanks with a pontoon or floating roof are more reliable constructions: they prevent the evaporation of stored liquid into the atmosphere. However, they must be operated without pressure and without vacuum.

A protective wall also prevents the stored product from entering the environment in case of leakage.

In case of ordering an RVSP-100 tank with a pontoon, it is manufactured with open compartments made of decking and annular ribs. A vertical pipe is installed in the center of these compartments to maintain the pontoon's horizontal position during loading and unloading operations.

Integral structural elements are ladders and platforms with or without railings, necessary for personnel access.

In the body and roof at the design stage, and then during manufacturing, hatches and nozzles are provided for the installation of technological equipment (receiving-dispensing equipment, level control devices, etc.). For this purpose, TOO SAMRUK KAZ factory provides for the production of technological tank equipment, which includes loading/unloading devices, nozzles, hatches, equipment for measuring the level of stored liquid. You can find more detailed information on the range of manufactured equipment in the "Tank Equipment" section.